Represents the standard SAL device management interface. More...

#include <bt_hal_manager.h>

Data Fields
BTStatus_t(*	pxBtManagerInit )(const BTCallbacks_t *pxCallbacks)
	Initializes the interface and provides callback routines. More...

BTStatus_t(*	pxBtManagerCleanup )(void)
	Free up the memory. More...

BTStatus_t(*	pxEnable )(uint8_t ucGuestMode)
	Enables Bluetooth module. More...

BTStatus_t(*	pxDisable )()
	Disables Bluetooth module. More...

BTStatus_t(*	pxGetAllDeviceProperties )()
	Retrieves all properties of local device. More...

BTStatus_t(*	pxGetDeviceProperty )(BTPropertyType_t xType)
	Get Bluetooth Adapter property of 'type'. More...

BTStatus_t(*	pxSetDeviceProperty )(const BTProperty_t *pxProperty)
	Sets Bluetooth Adapter property of 'type'.Based on the type, val shall be one of BTBdaddr_t or BTBdname_t or BTScanmode_t etc. More...

BTStatus_t(*	pxGetAllRemoteDeviceProperties )(BTBdaddr_t *pxRemoteAddr)
	Retrieves all properties of a remote device. More...

BTStatus_t(*	pxGetRemoteDeviceProperty )(BTBdaddr_t *pxRemoteAddr, BTPropertyType_t xType)
	Get Bluetooth property of 'type' associated with a remote device. More...

BTStatus_t(*	pxSetRemoteDeviceProperty )(BTBdaddr_t pxRemoteAddr, const BTProperty_t pxProperty)
	Sets Bluetooth property of 'type'.Based on the type, to a remote device. More...

BTStatus_t(*	pxPair )(const BTBdaddr_t *pxBdAddr, BTTransport_t xTransport, bool bCreateBond)
	Initiates Bluetooth pairing to a remote device. More...

BTStatus_t(*	pxCreateBondOutOfBand )(const BTBdaddr_t pxBdAddr, BTTransport_t xTransport, const BTOutOfBandData_t pxOobData)
	Sets out of band data for a device for pairing. More...

BTStatus_t(*	pxSendSlaveSecurityRequest )(const BTBdaddr_t *pxBdAddr, BTSecurityLevel_t xSecurityLevel, bool bBonding)
	Request authentication from the master. More...

BTStatus_t(*	pxCancelBond )(const BTBdaddr_t *pxBdAddr)
	Cancels an on going bonding procedure for the given device. More...

BTStatus_t(*	pxRemoveBond )(const BTBdaddr_t *pxBdAddr)
	Removes the bonding with a device. If there is an active connection with the device, connection will be disconnected. More...

BTStatus_t(*	pxGetConnectionState )(const BTBdaddr_t pxBdAddr, bool bConnectionState)
	Retrieves connection status for a device. More...

BTStatus_t(*	pxPinReply )(const BTBdaddr_t pxBdAddr, uint8_t ucAccept, uint8_t ucPinLen, BTPinCode_t pxPinCode)
	BT Legacy PinKey Reply. More...

BTStatus_t(*	pxSspReply )(const BTBdaddr_t *pxBdAddr, BTSspVariant_t xVariant, uint8_t ucAccept, uint32_t ulPasskey)
	BT SSP Reply - Just Works, Numeric Comparison and Passkey. More...

BTStatus_t(*	pxReadEnergyInfo )()
	Read Energy info details. More...

BTStatus_t(*	pxDutModeConfigure )(bool bEnable)

BTStatus_t(*	pxDutModeSend )(uint16_t usOpcode, uint8_t *pucBuf, size_t xLen)
	Send any test HCI (vendor-specific) command to the controller. Must be in DUT Mode. More...

BTStatus_t(*	pxLeTestMode )(uint16_t usOpcode, uint8_t *pucBuf, size_t xLen)
	Send LE test command (LE_Receiver_Test, LE_Transmitter_Test, LE_Test_End ) command to the controller. More...

BTStatus_t(*	pxConfigHCISnoopLog )(bool bEnable)
	Enables/disables capturing of HCI (snoop) logs. More...

BTStatus_t(*	pxConfigClear )()
	Clears the stack configuration cache. Equivalent to BT layer Factory reset. More...

BTStatus_t(*	pxReadRssi )(const BTBdaddr_t *pxBdAddr)
	Retrieves RSSI of a remote device. More...

BTStatus_t(*	pxGetTxpower )(const BTBdaddr_t *pxBdAddr, BTTransport_t xTransport)
	Retrieves TX power of a remote device. More...

const void (	pxGetClassicAdapter )()
	Retrieves the Classic interface. More...

const void (	pxGetLeAdapter )()
	Retrieves the HAL LE interface. More...

uint32_t(*	pxGetLastError )()
	Retrieves last error number from the stack. More...

BTStatus_t(*	pxGetStackFeaturesSupport )(uint32_t *pulFeatureMask)
	get stack features supported. More...

Detailed Description

Represents the standard SAL device management interface.

Field Documentation

◆ pxBtManagerInit

BTStatus_t( * BTInterface_t::pxBtManagerInit) (const BTCallbacks_t *pxCallbacks)

Initializes the interface and provides callback routines.

Parameters

[in] pxCallbacks Initializer for common GAP callbacks.

Returns: Returns eBTStatusSuccess on successful call.

◆ pxBtManagerCleanup

BTStatus_t( * BTInterface_t::pxBtManagerCleanup) (void)

Free up the memory.

@Warning: Note that similarly to pxBtManagerInit. Memory of adapter of server/client needs to be freed first (by calling pxUnregisterBleApp for example)

Returns: Returns eBTStatusSuccess on successful call.

◆ pxEnable

BTStatus_t( * BTInterface_t::pxEnable) (uint8_t ucGuestMode)

Enables Bluetooth module.

Trigger BTDeviceStateChangedCallback_t.

Parameters

[in] ucGuestMode True if Bluetooth needs to be enabled in guest mode else FALSE.

Returns: eBTStatusSuccess if BT enable permitted. Else error code.

◆ pxDisable

BTStatus_t( * BTInterface_t::pxDisable) ()

Disables Bluetooth module.

Trigger BTDeviceStateChangedCallback_t.

Returns: eBTStatusSuccess if BT disable permitted. Else error code.

◆ pxGetAllDeviceProperties

BTStatus_t( * BTInterface_t::pxGetAllDeviceProperties) ()

Retrieves all properties of local device.

Triggers BTDevicePropertiesCallback_t.

Returns: eBTStatusSuccess if the operation is successful, else error code. When properties are read, they will be returned as part of pxAdapterPropertiesCb()

◆ pxGetDeviceProperty

BTStatus_t( * BTInterface_t::pxGetDeviceProperty) (BTPropertyType_t xType)

Get Bluetooth Adapter property of 'type'.

Triggers BTDevicePropertiesCallback_t.

Parameters

[in] xType Property type.

Returns: eBTStatusSuccess if the operation is successful, else error code. When property is read, it will be returned as part of pxAdapterPropertiesCb(); eBTStatusSuccess if the operation is successful, else error code.

◆ pxSetDeviceProperty

BTStatus_t( * BTInterface_t::pxSetDeviceProperty) (const BTProperty_t *pxProperty)

Sets Bluetooth Adapter property of 'type'.Based on the type, val shall be one of BTBdaddr_t or BTBdname_t or BTScanmode_t etc.

Triggers BTDevicePropertiesCallback_t.

Parameters

[in] pxProperty Property containing BTProperty_t structure.

Returns: eBTStatusSuccess if the operation is successful, else error code.

◆ pxGetAllRemoteDeviceProperties

BTStatus_t( * BTInterface_t::pxGetAllRemoteDeviceProperties) (BTBdaddr_t *pxRemoteAddr)

Retrieves all properties of a remote device.

Triggers BTRemoteDevicePropertiesCallback_t.

Parameters

[in] pxRemoteAddr BT Address of remote device

Returns: eBTStatusSuccess if the operation is successful, else error code. When properties are read, they will be returned as part of pxAdapterPropertiesCb()

◆ pxGetRemoteDeviceProperty

BTStatus_t( * BTInterface_t::pxGetRemoteDeviceProperty) (BTBdaddr_t *pxRemoteAddr, BTPropertyType_t xType)

Get Bluetooth property of 'type' associated with a remote device.

Triggers BTRemoteDevicePropertiesCallback_t.

Parameters

[in]	pxRemoteAddr	BT Address of remote device.
[in]	xType	Property type.

Returns: eBTStatusSuccess if the operation is successful, else error code. When property is read, it will be returned as part of pxRemoteDevicePropertiesCb()

◆ pxSetRemoteDeviceProperty

BTStatus_t( * BTInterface_t::pxSetRemoteDeviceProperty) (BTBdaddr_t *pxRemoteAddr, const BTProperty_t *pxProperty)

Sets Bluetooth property of 'type'.Based on the type, to a remote device.

Triggers BTRemoteDevicePropertiesCallback_t.

Parameters

[in]	pxRemoteAddr	BT Address of remote device.
[in]	pxProperty	Property to be set on remote device.

Returns: eBTStatusSuccess if the operation is successful, else error code.

◆ pxPair

BTStatus_t( * BTInterface_t::pxPair) (const BTBdaddr_t *pxBdAddr, BTTransport_t xTransport, bool bCreateBond)

Initiates Bluetooth pairing to a remote device.

Triggers BTPairingStateChangedCallback_t on both central and peripheral.

Parameters

[in]	pxBdAddr	BT Address of remote device.
[in]	xTransport	Transport for bonding, one of the enumeration value from BTTransport_t.
[in]	bCreateBond	set this flag to TRUE if device needs to be bonded. (Remember link authentication information)

Returns: eBTStatusSuccess if the operation is successful, else error code.

◆ pxCreateBondOutOfBand

BTStatus_t( * BTInterface_t::pxCreateBondOutOfBand) (const BTBdaddr_t *pxBdAddr, BTTransport_t xTransport, const BTOutOfBandData_t *pxOobData)

Sets out of band data for a device for pairing.

Triggers BTPairingStateChangedCallback_t.

Parameters

[in]	pxBdAddr	BT Address of remote device.
[in]	xTransport	Specify if BLE and BT classic is being used.
[in]	pxOobData	Out of band data

Returns: eBTStatusSuccess if the operation is successful, else error code.

◆ pxSendSlaveSecurityRequest

BTStatus_t( * BTInterface_t::pxSendSlaveSecurityRequest) (const BTBdaddr_t *pxBdAddr, BTSecurityLevel_t xSecurityLevel, bool bBonding)

Request authentication from the master.

Triggers BTSlaveSecurityRequestCallBack_t and BTPairingStateChangedCallback_t if request is accepted.

Parameters

[in]	pxBda	Remote device address.
[in]	xSecurityLevel	Request security
[in]	bBonding	True is bonding is requested

Returns: eBTStatusSuccess if the operation is successful, else error code.

◆ pxCancelBond

BTStatus_t( * BTInterface_t::pxCancelBond) (const BTBdaddr_t *pxBdAddr)

Cancels an on going bonding procedure for the given device.

Triggers BTPairingStateChangedCallback_t.

Parameters

[in] pxBdAddr BT Address of device getting bonded.

Returns: eBTStatusSuccess if the operation is successful, else error code.

◆ pxRemoveBond

BTStatus_t( * BTInterface_t::pxRemoveBond) (const BTBdaddr_t *pxBdAddr)

Removes the bonding with a device. If there is an active connection with the device, connection will be disconnected.

Will invoke pxBondedCb.

Parameters

[in] pxBdAddr BT Address of device that needs to be unbonded.

Returns: eBTStatusSuccess if the operation is successful, else error code.

◆ pxGetConnectionState

BTStatus_t( * BTInterface_t::pxGetConnectionState) (const BTBdaddr_t *pxBdAddr, bool *bConnectionState)

Retrieves connection status for a device.

!TODO need an enum for connection state

Parameters

[in]	pxBdAddr	BT Address of device.
[in]	bConnectionState	true if connected false if not connected

Returns: Fail if there is no connection.

◆ pxPinReply

BTStatus_t( * BTInterface_t::pxPinReply) (const BTBdaddr_t *pxBdAddr, uint8_t ucAccept, uint8_t ucPinLen, BTPinCode_t *pxPinCode)

BT Legacy PinKey Reply.

Parameters

[in]	pxBdAddr	BT Address of device.
[in]	ucAccept	TRUE is pairing request is accepted, else FALSE.
[in]	ucPinLen	length of the pin code.
[in]	pxPinCode	Pin code.

Returns: eBTStatusSuccess if the operation is successful, else error code.

◆ pxSspReply

BTStatus_t( * BTInterface_t::pxSspReply) (const BTBdaddr_t *pxBdAddr, BTSspVariant_t xVariant, uint8_t ucAccept, uint32_t ulPasskey)

BT SSP Reply - Just Works, Numeric Comparison and Passkey.

Parameters

[in]	pxBdAddr	BT Address of device.
[in]	xVariant	Pairing variant.
[in]	ucAccept	TRUE is pairing request is accepted, else FALSE. When accept = FALSE,passkey shall be zero
[in]	ulPasskey	: passkey valid only when variant is BTSspVariantPasskeyEntry and BTSspVariantPasskeyNotification

Returns: eBTStatusSuccess if the operation is successful, else error code.

◆ pxReadEnergyInfo

BTStatus_t( * BTInterface_t::pxReadEnergyInfo) ()

Read Energy info details.

Triggers BTEnergyInfoCallback_t.

Returns: value indicates eBTStatusSuccess or eBTStatusNotReady, Success indicates that the VSC command was sent to controller

◆ pxDutModeConfigure

BTStatus_t( * BTInterface_t::pxDutModeConfigure) (bool bEnable)

Enables/disables local device to DUT mode.

Parameters

[in] bEnable TRUE if DUT mode needs to be enabled, else FALSE.

Returns: eBTStatusSuccess if the operation is successful, else error code.

◆ pxDutModeSend

BTStatus_t( * BTInterface_t::pxDutModeSend) (uint16_t usOpcode, uint8_t *pucBuf, size_t xLen)

Send any test HCI (vendor-specific) command to the controller. Must be in DUT Mode.

Triggers BTDutModeRecvCallback_t on remote device.

Parameters

[in]	usOpcode	HCI VSC opcode.
[in]	pucBuf	Parameters associated with the command represented in byte buffer.
[in]	xLen	Total length of parameter buffer.

Returns: eBTStatusSuccess if the operation is successful, else error code.

◆ pxLeTestMode

BTStatus_t( * BTInterface_t::pxLeTestMode) (uint16_t usOpcode, uint8_t *pucBuf, size_t xLen)

Send LE test command (LE_Receiver_Test, LE_Transmitter_Test, LE_Test_End ) command to the controller.

Triggers BTLeTestModeCallback_t.

Parameters

[in]	usOpcode,LE	test VSC opcode.
[in]	pucBuf	Parameters associated with the command represented in byte buffer.
[in]	xLen	Total length of parameter buffer.

Returns: eBTStatusSuccess if the operation is successful, else error code.

◆ pxConfigHCISnoopLog

BTStatus_t( * BTInterface_t::pxConfigHCISnoopLog) (bool bEnable)

Enables/disables capturing of HCI (snoop) logs.

Parameters

[in] bEnable TRUE if snoop logs needs to be enabled, else FALSE

Returns: eBTStatusSuccess if the operation is successful, else error code.

◆ pxConfigClear

BTStatus_t( * BTInterface_t::pxConfigClear) ()

Clears the stack configuration cache. Equivalent to BT layer Factory reset.

Returns: eBTStatusSuccess if the operation is successful, else error code.

◆ pxReadRssi

BTStatus_t( * BTInterface_t::pxReadRssi) (const BTBdaddr_t *pxBdAddr)

Retrieves RSSI of a remote device.

Triggers BTReadRssiCallback_t.

Parameters

[in] pxBdAddr BT Address of remote device

Returns: eBTStatusSuccess if the operation is successful, else error code.

◆ pxGetTxpower

BTStatus_t( * BTInterface_t::pxGetTxpower) (const BTBdaddr_t *pxBdAddr, BTTransport_t xTransport)

Retrieves TX power of a remote device.

Triggers BTTxPowerCallback_t.

Parameters

[in]	pxBdAddr	BT Address of remote device.
[in]	xTransport	LE / Classic.

Returns: eBTStatusSuccess if the operation is successful, else error code.

◆ pxGetClassicAdapter

const void*( * BTInterface_t::pxGetClassicAdapter) ()

Retrieves the Classic interface.

Returns: void* pointer that points to the profile interface itself. This needs to be type-casted to the Classic interface by the caller

◆ pxGetLeAdapter

const void*( * BTInterface_t::pxGetLeAdapter) ()

Retrieves the HAL LE interface.

Returns: void* pointer that points to the BLE adapter interface itself. This needs to be type-casted to the LE interface by the caller

◆ pxGetLastError

uint32_t( * BTInterface_t::pxGetLastError) ()

Retrieves last error number from the stack.

Returns: error no of the last operation.

◆ pxGetStackFeaturesSupport

BTStatus_t( * BTInterface_t::pxGetStackFeaturesSupport) (uint32_t *pulFeatureMask)

get stack features supported.

Parameters

[out] pulFeatureMask feature mask

Returns: Returns eBTStatusSuccess on successful call.

The documentation for this struct was generated from the following file:

bt_hal_manager.h

Data Fields

Detailed Description

Field Documentation

◆ pxBtManagerInit

◆ pxBtManagerCleanup

◆ pxEnable

◆ pxDisable

◆ pxGetAllDeviceProperties

◆ pxGetDeviceProperty

◆ pxSetDeviceProperty

◆ pxGetAllRemoteDeviceProperties

◆ pxGetRemoteDeviceProperty

◆ pxSetRemoteDeviceProperty

◆ pxPair

◆ pxCreateBondOutOfBand

◆ pxSendSlaveSecurityRequest

◆ pxCancelBond

◆ pxRemoveBond

◆ pxGetConnectionState

◆ pxPinReply

◆ pxSspReply

◆ pxReadEnergyInfo

◆ pxDutModeConfigure

◆ pxDutModeSend

◆ pxLeTestMode

◆ pxConfigHCISnoopLog

◆ pxConfigClear

◆ pxReadRssi

◆ pxGetTxpower

◆ pxGetClassicAdapter

◆ pxGetLeAdapter

◆ pxGetLastError

◆ pxGetStackFeaturesSupport