AWS IoT Over-the-air Update v3.4.0
Client library for AWS IoT OTA
 
Loading...
Searching...
No Matches
ota_platform_interface.h File Reference

Contains PAL interface statuses, type definitions and structure to store interface routines. More...

#include "ota_private.h"
Include dependency graph for ota_platform_interface.h:
This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Data Structures

struct  OtaPalInterface_t
 OTA pal Interface structure. More...
 

Macros

#define OtaPalSuccess   0x0U
 OTA platform interface success.
 
#define OtaPalUninitialized   0xe0U
 Result is not yet initialized from PAL.
 
#define OtaPalOutOfMemory   0xe1U
 Out of memory.
 
#define OtaPalNullFileContext   0xe2U
 The PAL is called with a NULL file context.
 
#define OtaPalSignatureCheckFailed   0xe3U
 The signature check failed for the specified file.
 
#define OtaPalRxFileCreateFailed   0xe4U
 The PAL failed to create the OTA receive file.
 
#define OtaPalRxFileTooLarge   0xe5U
 The OTA receive file is too big for the platform to support.
 
#define OtaPalBootInfoCreateFailed   0xe6U
 The PAL failed to create the OTA boot info file.
 
#define OtaPalBadSignerCert   0xe7U
 The signer certificate was not readable or zero length.
 
#define OtaPalBadImageState   0xe8U
 The specified OTA image state was out of range.
 
#define OtaPalAbortFailed   0xe9U
 Error trying to abort the OTA.
 
#define OtaPalRejectFailed   0xeaU
 Error trying to reject the OTA image.
 
#define OtaPalCommitFailed   0xebU
 The acceptance commit of the new OTA image failed.
 
#define OtaPalActivateFailed   0xecU
 The activation of the new OTA image failed.
 
#define OtaPalFileAbort   0xedU
 Error in low level file abort.
 
#define OtaPalFileClose   0xeeU
 Error in low level file close.
 
#define OTA_PAL_ERR_MASK   0xffffffUL
 
#define OTA_PAL_SUB_BITS   24U
 
#define OTA_PAL_MAIN_ERR(err)   ( ( OtaPalMainStatus_t ) ( uint32_t ) ( ( uint32_t ) ( err ) >> ( uint32_t ) OTA_PAL_SUB_BITS ) )
 
#define OTA_PAL_SUB_ERR(err)   ( ( ( uint32_t ) ( err ) ) & ( ( uint32_t ) OTA_PAL_ERR_MASK ) )
 
#define OTA_PAL_COMBINE_ERR(main, sub)   ( ( ( uint32_t ) ( main ) << ( uint32_t ) OTA_PAL_SUB_BITS ) | ( uint32_t ) OTA_PAL_SUB_ERR( sub ) )
 

Typedefs

typedef uint32_t OtaPalStatus_t
 The OTA platform interface return status. Composed of main and sub status.
 
typedef uint32_t OtaPalSubStatus_t
 The OTA platform interface sub status.
 
typedef uint32_t OtaPalMainStatus_t
 The OTA platform interface main status.
 
typedef OtaPalStatus_t(* OtaPalAbort_t) (OtaFileContext_t *const pFileContext)
 Abort an OTA transfer.
 
typedef OtaPalStatus_t(* OtaPalCreateFileForRx_t) (OtaFileContext_t *const pFileContext)
 Create a new receive file for the data chunks as they come in.
 
typedef OtaPalStatus_t(* OtaPalCloseFile_t) (OtaFileContext_t *const pFileContext)
 Authenticate and close the underlying receive file in the specified OTA context.
 
typedef int16_t(* OtaPalWriteBlock_t) (OtaFileContext_t *const pFileContext, uint32_t offset, uint8_t *const pData, uint32_t blockSize)
 Write a block of data to the specified file at the given offset.
 
typedef OtaPalStatus_t(* OtaPalActivateNewImage_t) (OtaFileContext_t *const pFileContext)
 Activate the newest MCU image received via OTA.
 
typedef OtaPalStatus_t(* OtaPalResetDevice_t) (OtaFileContext_t *const pFileContext)
 Reset the device.
 
typedef OtaPalStatus_t(* OtaPalSetPlatformImageState_t) (OtaFileContext_t *const pFileContext, OtaImageState_t eState)
 Attempt to set the state of the OTA update image.
 
typedef OtaPalImageState_t(* OtaPalGetPlatformImageState_t) (OtaFileContext_t *const pFileContext)
 Get the state of the OTA update image.
 

Detailed Description

Contains PAL interface statuses, type definitions and structure to store interface routines.

Macro Definition Documentation

◆ OTA_PAL_ERR_MASK

#define OTA_PAL_ERR_MASK   0xffffffUL

The PAL layer uses the signed low 24 bits of the OTA error code.

◆ OTA_PAL_SUB_BITS

#define OTA_PAL_SUB_BITS   24U

The OTA Agent error code is the highest 8 bits of the word.

◆ OTA_PAL_MAIN_ERR

#define OTA_PAL_MAIN_ERR (   err)    ( ( OtaPalMainStatus_t ) ( uint32_t ) ( ( uint32_t ) ( err ) >> ( uint32_t ) OTA_PAL_SUB_BITS ) )

Helper to get the OTA PAL main error code.

◆ OTA_PAL_SUB_ERR

#define OTA_PAL_SUB_ERR (   err)    ( ( ( uint32_t ) ( err ) ) & ( ( uint32_t ) OTA_PAL_ERR_MASK ) )

Helper to get the OTA PAL sub error code.

◆ OTA_PAL_COMBINE_ERR

#define OTA_PAL_COMBINE_ERR (   main,
  sub 
)    ( ( ( uint32_t ) ( main ) << ( uint32_t ) OTA_PAL_SUB_BITS ) | ( uint32_t ) OTA_PAL_SUB_ERR( sub ) )

Helper to combine the OTA PAL main and sub error code.

Typedef Documentation

◆ OtaPalAbort_t

typedef OtaPalStatus_t(* OtaPalAbort_t) (OtaFileContext_t *const pFileContext)

Abort an OTA transfer.

Aborts access to an existing open file represented by the OTA file context pFileContext. This is only valid for jobs that started successfully.

Note
The input OtaFileContext_t pFileContext is checked for NULL by the OTA agent before this function is called. This function may be called before the file is opened, so the file pointer pFileContext->fileHandle may be NULL when this function is called.
Parameters
[in]pFileContextOTA file context information.
Returns
The OTA PAL layer error code combined with the MCU specific error code. See OTA Agent error codes information in ota.h.

The file pointer will be set to NULL after this function returns. OtaPalSuccess is returned when aborting access to the open file was successful. OtaPalFileAbort is returned when aborting access to the open file context was unsuccessful.

◆ OtaPalCreateFileForRx_t

typedef OtaPalStatus_t(* OtaPalCreateFileForRx_t) (OtaFileContext_t *const pFileContext)

Create a new receive file for the data chunks as they come in.

Note
Opens the file indicated in the OTA file context in the MCU file system.
The previous image may be present in the designated image download partition or file, so the partition or file must be completely erased or overwritten in this routine.
The input OtaFileContext_t pFileContext is checked for NULL by the OTA agent before this function is called. The device file path is a required field in the OTA job document, so pFileContext->pFilePath is checked for NULL by the OTA agent before this function is called.
Parameters
[in]pFileContextOTA file context information.
Returns
The OTA PAL layer error code combined with the MCU specific error code. See OTA Agent error codes information in ota.h.

OtaPalSuccess is returned when file creation is successful. OtaPalRxFileTooLarge is returned if the file to be created exceeds the device's non-volatile memory size constraints. OtaPalBootInfoCreateFailed is returned if the bootloader information file creation fails. OtaPalRxFileCreateFailed is returned for other errors creating the file in the device's non-volatile memory.

◆ OtaPalCloseFile_t

typedef OtaPalStatus_t(* OtaPalCloseFile_t) (OtaFileContext_t *const pFileContext)

Authenticate and close the underlying receive file in the specified OTA context.

Note
The input OtaFileContext_t pFileContext is checked for NULL by the OTA agent before this function is called. This function is called only at the end of block ingestion. prvPAL_CreateFileForRx() must succeed before this function is reached, so pFileContext->fileHandle(or pFileContext->pFile) is never NULL. The certificate path on the device is a required job document field in the OTA Agent, so pFileContext->pCertFilepath is never NULL. The file signature key is required job document field in the OTA Agent, so pFileContext->pSignature will never be NULL.

If the signature verification fails, file close should still be attempted.

Parameters
[in]pFileContextOTA file context information.
Returns
The OTA PAL layer error code combined with the MCU specific error code. See OTA Agent error codes information in ota.h.

OtaPalSuccess is returned on success. OtaPalSignatureCheckFailed is returned when cryptographic signature verification fails. OtaPalBadSignerCert is returned for errors in the certificate itself. OtaPalFileClose is returned when closing the file fails.

◆ OtaPalWriteBlock_t

typedef int16_t(* OtaPalWriteBlock_t) (OtaFileContext_t *const pFileContext, uint32_t offset, uint8_t *const pData, uint32_t blockSize)

Write a block of data to the specified file at the given offset.

Note
This function must always write a complete file block before returning. So the number of bytes written will be equal to the size of the file block. Exception only in case of last block where the number of bytes written will be equal or less than the size of the file block.
The input OtaFileContext_t pFileContext is checked for NULL by the OTA agent before this function is called. The file pointer/handle pFileContext->pFile, is checked for NULL by the OTA agent before this function is called. pData is checked for NULL by the OTA agent before this function is called. blockSize is validated for range by the OTA agent before this function is called. offset is validated by the OTA agent before this function is called.
Parameters
[in]pFileContextOTA file context information.
[in]offsetByte offset to write to from the beginning of the file.
[in]pDataPointer to the byte array of data to write.
[in]blockSizeThe number of bytes to write.
Returns
The number of bytes written on a success, or a negative error code from the platform abstraction layer.

◆ OtaPalActivateNewImage_t

typedef OtaPalStatus_t(* OtaPalActivateNewImage_t) (OtaFileContext_t *const pFileContext)

Activate the newest MCU image received via OTA.

This function shall do whatever is necessary to activate the newest MCU firmware received via OTA. It is typically just a reset of the device.

Note
This function SHOULD not return. If it does, the platform does not support an automatic reset or an error occurred.
Returns
The OTA PAL layer error code combined with the MCU specific error code. See OTA Agent error codes information in ota.h.

◆ OtaPalResetDevice_t

typedef OtaPalStatus_t(* OtaPalResetDevice_t) (OtaFileContext_t *const pFileContext)

Reset the device.

This function shall reset the MCU and cause a reboot of the system.

Note
This function SHOULD not return. If it does, the platform does not support an automatic reset or an error occurred.
Returns
The OTA PAL layer error code combined with the MCU specific error code. See OTA Agent error codes information in ota.h.

◆ OtaPalSetPlatformImageState_t

typedef OtaPalStatus_t(* OtaPalSetPlatformImageState_t) (OtaFileContext_t *const pFileContext, OtaImageState_t eState)

Attempt to set the state of the OTA update image.

Do whatever is required by the platform to Accept/Reject the OTA update image (or bundle). Refer to the PAL implementation to determine what happens on your platform.

Parameters
[in]pFileContextFile context of type OtaFileContext_t.
[in]eStateThe desired state of the OTA update image.
Returns
The OtaPalStatus_t error code combined with the MCU specific error code. See ota.h for OTA major error codes and your specific PAL implementation for the sub error code.

Major error codes returned are:

OtaPalSuccess on success. OtaPalBadImageState: if you specify an invalid OtaImageState_t. No sub error code. OtaPalAbortFailed: failed to roll back the update image as requested by OtaImageStateAborted. OtaPalRejectFailed: failed to roll back the update image as requested by OtaImageStateRejected. OtaPalCommitFailed: failed to make the update image permanent as requested by OtaImageStateAccepted.

◆ OtaPalGetPlatformImageState_t

typedef OtaPalImageState_t(* OtaPalGetPlatformImageState_t) (OtaFileContext_t *const pFileContext)

Get the state of the OTA update image.

We read this at OTA_Init time and when the latest OTA job reports itself in self test. If the update image is in the "pending commit" state, we start a self test timer to assure that we can successfully connect to the OTA services and accept the OTA update image within a reasonable amount of time (user configurable). If we don't satisfy that requirement, we assume there is something wrong with the firmware and automatically reset the device, causing it to roll back to the previously known working code.

If the update image state is not in "pending commit," the self test timer is not started.

Parameters
[in]pFileContextFile context of type OtaFileContext_t.
Returns
An OtaPalImageState_t. One of the following: OtaPalImageStatePendingCommit (the new firmware image is in the self test phase) OtaPalImageStateValid (the new firmware image is already committed) OtaPalImageStateInvalid (the new firmware image is invalid or non-existent)

NOTE: OtaPalImageStateUnknown should NEVER be returned and indicates an implementation error.