Use interface VPC endpoints (AWS PrivateLink) to create a private connection between your VPC and your AgentCore resources¶

You can use AWS PrivateLink to create a private connection between your VPC and Amazon Bedrock AgentCore. You can access AgentCore as if it were in your VPC, without the use of an internet gateway, NAT device, VPN connection, or AWS Direct Connect connection. Instances in your VPC don't need public IP addresses to access AgentCore.

You establish this private connection by creating an interface endpoint, powered by AWS PrivateLink. We create an endpoint network interface in each subnet that you enable for the interface endpoint. These are requester-managed network interfaces that serve as the entry point for traffic destined for AgentCore.

For more information, see Access AWS services through AWS PrivateLink in the AWS PrivateLink Guide.

Considerations for AgentCore¶

Before you set up an interface endpoint for AgentCore, review Considerations in the AWS PrivateLink Guide.

AgentCore supports the following through interface endpoints:

Data plane operations (runtime APIs)
Invoking gateways

Note¶

AWS PrivateLink is currently not supported for Amazon Bedrock AgentCore control plane endpoints.

AgentCore interface endpoints are available in the following AWS Regions:

US East (N. Virginia)
US West (Oregon)
Europe (Frankfurt)
Asia Pacific (Sydney)

Authorization considerations for data plane APIs¶

The data plane APIs support both AWS Signature Version 4 (SigV4) headers for authentication and Bearer Token (OAuth) authentication. VPC endpoint policies can only restrict callers based on IAM principals and not OAuth users. For OAuth-based requests to succeed through the VPC endpoint, the principal must be set to * in the endpoint policy. Otherwise, only SigV4 allowlisted callers can make successful calls over the VPC endpoint.

AWS IAM global condition context keys are supported. By default, full access to AgentCore is allowed through the interface endpoint. You can control access by attaching an endpoint policy to the interface endpoint or by associating a security group with the endpoint network interfaces.

Create an interface endpoint for AgentCore¶

You can create an interface endpoint for AgentCore using either the Amazon VPC console or the AWS Command Line Interface (AWS CLI). For more information, see Create an interface endpoint in the AWS PrivateLink Guide.

Create an interface endpoint for AgentCore using the following service name format:

Data plane operations: com.amazonaws.region.bedrock-agentcore
For AgentCore Gateway: com.amazonaws.region.bedrock-agentcore.gateway

If you enable private DNS for the interface endpoint, you can make API requests to AgentCore using its default Regional DNS name. For example, bedrock-agentcore.us-east-1.amazonaws.com.

Create an endpoint policy for your interface endpoint¶

An endpoint policy is an IAM resource that you can attach to an interface endpoint. The default endpoint policy allows full access to AgentCore through the interface endpoint. To control the access allowed to AgentCore from your VPC, attach a custom endpoint policy to the interface endpoint.

An endpoint policy specifies the following information:

The principals that can perform actions (AWS accounts, IAM users, and IAM roles).
For AgentCore Gateway, if your gateway ingress isn't AWS Signature Version 4 (SigV4)-based (for example, if you use OAuth instead), you must specify the Principal field as the wildcard *. SigV4 -based authentication allows you to define the Principal as a specific AWS identity.
The actions that can be performed.
The resources on which the actions can be performed.

For more information, see Control access to services using endpoint policies in the AWS PrivateLink Guide.

Endpoint policies for various primitives¶

The following examples show endpoint policies for different AgentCore components:

Runtime : The following endpoint policy allows specific IAM principals to invoke agent runtime resources.

```
{
   "Statement": [
      {
         "Effect": "Allow",
         "Principal": {
            "AWS": "arn:aws::iam::ACCOUNT_ID:user/USERNAME"
         },
         "Action": [
            "bedrock-agentcore:InvokeAgentRuntime"
         ],
         "Resource": "arn:aws::bedrock-agentcore:us-east-1:ACCOUNT_ID:runtime/RUNTIME_ID"
      }
   ]
}
```

###### Mixed IAM and OAuth authentication

The `InvokeAgentRuntime` API supports two modes of VPC endpoint authorization. The following example policy allows both IAM principals and OAuth callers to access different agent runtime resources.

```
{
   "Statement": [
      {
         "Effect": "Allow",
         "Principal": {
            "AWS": "arn:aws::iam::ACCOUNT_ID:root"
         },
         "Action": [
            "bedrock-agentcore:InvokeAgentRuntime"
         ],
         "Resource": "arn:aws::bedrock-agentcore:us-east-1:ACCOUNT_ID:runtime/customAgent1"
      },
      {
         "Effect": "Allow",
         "Principal": "*",
         "Action": [
            "bedrock-agentcore:InvokeAgentRuntime"
         ],
         "Resource": "arn:aws::bedrock-agentcore:us-east-1:ACCOUNT_ID:runtime/customAgent2"
      }
   ]
}
```

The above policy allows only the IAM principal to make `InvokeAgentRuntime` calls to `customAgent1`. It also allows both IAM principals and OAuth callers to make `InvokeAgentRuntime` calls to `customAgent2`.

Code Interpreter : The following endpoint policy allows specific IAM principals to invoke Code Interpreter resources.

```
{
   "Statement": [
      {
         "Effect": "Allow",
         "Principal": {
            "AWS": "arn:aws::iam::ACCOUNT_ID:root"
         },
         "Action": [
            "bedrock-agentcore:InvokeCodeInterpreter"
         ],
         "Resource": "arn:aws::bedrock-agentcore:us-east-1:ACCOUNT_ID:code-interpreter/CODE_INTERPRETER_ID"
      }
   ]
}
```

Memory : ###### All data plane operations

The following endpoint policy allows specific IAM principals to access us-east-1 data plane operations
for a specific AgentCore Memory.

```
{
   "Statement": [
      {
         "Effect": "Allow",
         "Principal": {
            "AWS": "arn:aws::iam::ACCOUNT_ID:root"
         },
         "Action": [
            "bedrock-agentcore:CreateEvent",
            "bedrock-agentcore:DeleteEvent",
            "bedrock-agentcore:GetEvent",
            "bedrock-agentcore:ListEvents",
            "bedrock-agentcore:DeleteMemoryRecord",
            "bedrock-agentcore:GetMemoryRecord",
            "bedrock-agentcore:ListMemoryRecords",
            "bedrock-agentcore:RetrieveMemoryRecords",
            "bedrock-agentcore:ListActors",
            "bedrock-agentcore:ListSessions",
            "bedrock-agentcore:BatchCreateMemoryRecords",
            "bedrock-agentcore:BatchDeleteMemoryRecords",
            "bedrock-agentcore:BatchUpdateMemoryRecords"
         ],
         "Resource": "arn:aws::bedrock-agentcore:us-east-1:ACCOUNT_ID:memory/MEMORY_ID"
      }
   ]
}
```

###### Access to all memories

The following endpoint policy allows specific IAM principals access to all memories.

```
{
   "Statement": [
      {
         "Effect": "Allow",
         "Principal": {
            "AWS": "arn:aws::iam::ACCOUNT_ID:root"
         },
         "Action": [
            "bedrock-agentcore:CreateEvent",
            "bedrock-agentcore:DeleteEvent",
            "bedrock-agentcore:GetEvent",
            "bedrock-agentcore:ListEvents",
            "bedrock-agentcore:DeleteMemoryRecord",
            "bedrock-agentcore:GetMemoryRecord",
            "bedrock-agentcore:ListMemoryRecords",
            "bedrock-agentcore:RetrieveMemoryRecords",
            "bedrock-agentcore:ListActors",
            "bedrock-agentcore:ListSessions",
            "bedrock-agentcore:BatchCreateMemoryRecords",
            "bedrock-agentcore:BatchDeleteMemoryRecords",
            "bedrock-agentcore:BatchUpdateMemoryRecords"
         ],
         "Resource": "arn:aws::bedrock-agentcore:us-east-1:ACCOUNT_ID:memory/*"
      }
   ]
}
```

###### Access restriction by APIs

The following endpoint policy grants permission for a specific IAM principal to create events in a
specific AgentCore Memory resource.

```
{
   "Statement": [
      {
         "Effect": "Allow",
         "Principal": {
            "AWS": "arn:aws::iam::ACCOUNT_ID:root"
         },
         "Action": [
            "bedrock-agentcore:CreateEvent"
         ],
         "Resource": "arn:aws::bedrock-agentcore:us-east-1:ACCOUNT_ID:memory/MEMORY_ID"
      }
   ]
}
```

Browser Tool : The following endpoint policy allows specific IAM principals to connect to Browser Tool resources.

```
{
   "Statement": [
      {
         "Effect": "Allow",
         "Principal": {
            "AWS": "arn:aws::iam::ACCOUNT_ID:root"
         },
         "Action": [
            "bedrock-agentcore:ConnectBrowserAutomationStream"
         ],
         "Resource": "arn:aws::bedrock-agentcore:us-east-1:ACCOUNT_ID:browser/BROWSER_ID"
      }
   ]
}
```

Gateway : The following is an example of a custom endpoint policy. When you attach this policy to your interface endpoint, it allows all principals to invoke the gateway specified in the Resource field.

```
{
   "Statement": [
      {
         "Effect": "Allow",
         "Principal": "*",
         "Action": [
            "bedrock:InvokeGateway"
         ],
         "Resource": "arn:aws::bedrock-agentcore:us-east-1::gateway/my-gateway"
      }
   ]
}
```

Identity : The following endpoint policy allows access to Identity resources.

```
{
   "Statement": [
      {
         "Effect": "Allow",
         "Principal": "*",
         "Action": [
            "*"
         ],
         "Resource": "arn:aws:bedrock-agentcore:us-east-1:ACCOUNT_ID:workload-identity-directory/default/workload-identity/WORKLOAD_IDENTITY_ID"
      }
   ]
}
```